To update the firmware on the PACMod, first gain access to the front panel of the PACMod unit. The location of the PACMod varies with each model vehicle.

Step-by-step guide

If AutonomouStuff indicates that a new firmware release is available, please contact support@autonomoustuff.com to obtain the new firmware file.
After gaining access to the front panel of the PACMod, use a USB 2.0 B cable to the port as seen in Figure 1 and connect to a computer.
The PACMod will show up as a removable drive entitled “MBED.” Delete the existing “.bin” file and replace it with the most current “.bin” file provided by AutonomouStuff. Eject the PACMod from the computer and remove the USB 2.0 B cable. Use Figure 2 for reference.
Perform a reset of the PACMod by pressing the red button on the front panel as seen in Figure 1. The firmware on the PACMod has now been successfully updated. Replace any panels or components that may have been removed to gain access to the front panel using the appropriate guidance material.

Related articles

Browser not supported